2018 Exmark LZS651CKA484A2

Call for Price


Availability
Brochure
Year
2018
Manufacturer
Exmark
Model
LZS651CKA484A2

Overview

Description

More power. More features. More productivity.



With the S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCutâ„¢ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features
  • Doing More With Propane: Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.
  • Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
  • Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
  • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
  • Drive Tires: 23 x 9.5-12, 4 ply Turf Master®
  • Cup Holder: Standard
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Front Caster Tires: 13 x 5.0-6, smooth-tread, semi-pneumatic.
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Electrical: 12-volt battery with 15-amp alternator.
Power Components
  • Engine Brand: Kawasaki®
  • Engine Model: FX651V
  • Engine Displacement: 726
  • Engine Series: V-Twin
  • Engine Type: Carbureted
  • Engine Speed: 3,750 RPM
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Type: Gas Carbureted
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - electronic Sender
  • Drive: Hydro-Drive
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
  • Carb Compliant: Yes
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Drive Wheel Release: Allows unit movement without engine running.
  • Casters: .50" thick caster yoke arms.
  • Model Description: Lazer Z S-Series 20.5 HP* Kaw FX651V w/48" UltraCut Series 4 Deck, Susp Seat & Narrow Semi-Pneum
Decks
  • Width / Cutting Deck: 48"
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
  • Blades: 3 Blades at 16.25" Length
Dimensions
  • Width: 59.6 in. (151.4 cm)
  • Length: 79.2 in. (201.2 cm)
  • Height: 70 in. (177.8 cm)
  • Curb Weight: 1142
NOTES:
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower. **The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers may be significantly lower.

Specs

Engine

Engine Manufacturer
Kawasaki®
Engine Type
FX651V
Displacement
726cc

General

Transmission
Hydro-Drive
Wheel Size
23 x 9.5-12, 4 ply Turf Master®
Fuel Capacity
12 gal. (45.4 L)

Deck

Deck Size
48 in.

Related Products